 |
|
|
|
Next: Convert Novell Netware DHCP to Windows 2003
|
| Author |
Message |
External
Since: Oct 02, 2007
Posts: 3
|
(Msg. 1) Posted: Tue Oct 02, 2007 1:57 pm
Post subject: Symantec System Center Console on SBS 2003
Archived from groups: microsoft>public>windows>server>sbs (more info?)
|
|
|
I posted this on a Symantec newsgroup, but thought I might get some insight
here...
We have a new Small Business Server 2003, running the Corporate Edition v.10
of Symantec AntiVirus. It is in a managed setup, with the console installed
on the server. After restarting the server, access to the SSCC is fine.
However, after a while -- perhaps a few hours, up to a day -- the SSCC fails
to open (the hourglass flickers for a second, then nothing happens). If you
look in the Task Manager, "mmc" is running, but the SSCC never opened. I
verified through Services that the follow services are all automatic, and
running:
Symantec AntiVirus
Symantec AntiVirus Definition Watcher
Symantec Event Manager
Symantec Settings Manager
Symantec System Center Discovery Service
Anyone have any thoughts/suggestions as to what is going on, and how I can
open the SSCC without restarting the server all the time?
Thanks.
Corey |
|
| Back to top |
|
 | |
External
Since: Jun 14, 2007
Posts: 19
|
(Msg. 2) Posted: Tue Oct 02, 2007 2:48 pm
Post subject: Re: Symantec System Center Console on SBS 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Corey" wrote in message
>I posted this on a Symantec newsgroup, but thought I might get some insight
>here...
>
> We have a new Small Business Server 2003, running the Corporate Edition
> v.10
> of Symantec AntiVirus. It is in a managed setup, with the console
> installed
> on the server. After restarting the server, access to the SSCC is fine.
> However, after a while -- perhaps a few hours, up to a day -- the SSCC
> fails
> to open (the hourglass flickers for a second, then nothing happens). If
> you
> look in the Task Manager, "mmc" is running, but the SSCC never opened. I
> verified through Services that the follow services are all automatic, and
> running:
>
> Symantec AntiVirus
> Symantec AntiVirus Definition Watcher
> Symantec Event Manager
> Symantec Settings Manager
> Symantec System Center Discovery Service
>
>
> Anyone have any thoughts/suggestions as to what is going on, and how I can
> open the SSCC without restarting the server all the time?
>
> Thanks.
>
> Corey
>
Corey, have you tried uninstalling and reinstalling the SSCC? |
|
| Back to top |
|
| |
External
Since: Oct 02, 2007
Posts: 1
|
(Msg. 3) Posted: Tue Oct 02, 2007 9:05 pm
Post subject: Re: Symantec System Center Console on SBS 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
We run many SAV installs and have not seen this problem. A couple of thoughts:
- uninstall all of the parts
- run nonav (on the cdrom in the tools directory)
- download and install the latest version from the fileconnect website
--
Howard Cunningham
MS Small Business Specialist
Macro Systems, LLC
3867 Plaza Drive
Fairfax, VA 22030
www.macrollc.com
"dan" wrote:
>
> "Corey" wrote in message
>
> >I posted this on a Symantec newsgroup, but thought I might get some insight
> >here...
> >
> > We have a new Small Business Server 2003, running the Corporate Edition
> > v.10
> > of Symantec AntiVirus. It is in a managed setup, with the console
> > installed
> > on the server. After restarting the server, access to the SSCC is fine.
> > However, after a while -- perhaps a few hours, up to a day -- the SSCC
> > fails
> > to open (the hourglass flickers for a second, then nothing happens). If
> > you
> > look in the Task Manager, "mmc" is running, but the SSCC never opened. I
> > verified through Services that the follow services are all automatic, and
> > running:
> >
> > Symantec AntiVirus
> > Symantec AntiVirus Definition Watcher
> > Symantec Event Manager
> > Symantec Settings Manager
> > Symantec System Center Discovery Service
> >
> >
> > Anyone have any thoughts/suggestions as to what is going on, and how I can
> > open the SSCC without restarting the server all the time?
> >
> > Thanks.
> >
> > Corey
> >
> Corey, have you tried uninstalling and reinstalling the SSCC?
>
>
> >> Stay informed about: Symantec System Center Console on SBS 2003 |
|
| Back to top |
|
| |
External
Since: Jul 07, 2005
Posts: 968
|
(Msg. 4) Posted: Wed Oct 03, 2007 8:50 am
Post subject: Re: Symantec System Center Console on SBS 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In article , czinn.RemoveThis@makromed.com
says...
> I posted this on a Symantec newsgroup, but thought I might get some insight
> here...
>
> We have a new Small Business Server 2003, running the Corporate Edition v.10
> of Symantec AntiVirus. It is in a managed setup, with the console installed
> on the server. After restarting the server, access to the SSCC is fine.
> However, after a while -- perhaps a few hours, up to a day -- the SSCC fails
> to open (the hourglass flickers for a second, then nothing happens). If you
> look in the Task Manager, "mmc" is running, but the SSCC never opened. I
> verified through Services that the follow services are all automatic, and
> running:
>
> Symantec AntiVirus
> Symantec AntiVirus Definition Watcher
> Symantec Event Manager
> Symantec Settings Manager
> Symantec System Center Discovery Service
>
>
> Anyone have any thoughts/suggestions as to what is going on, and how I can
> open the SSCC without restarting the server all the time?
If you're running 10.2, uninstall it and install 10.0 or 10.1, not
10.1.5. I've had to remove the 10.2 (installs on 2003 as 10.1.5) on
every server/network because of profile corruptions and lockups.
Symantec just sent me the Symantec EndPoint Protection as a replacement
for 10.x Corporate Edition (shows as version 11 now) and it's different.
I'm about to install SEPP on the same servers where 10.2 was locking up.
--
Leythos
- Igitur qui desiderat pacem, praeparet bellum.
- Calling an illegal alien an "undocumented worker" is like calling a
drug dealer an "unlicensed pharmacist"
spam999free.RemoveThis@rrohio.com (remove 999 for proper email address) >> Stay informed about: Symantec System Center Console on SBS 2003 |
|
| Back to top |
|
| |
External
Since: Jun 14, 2007
Posts: 19
|
(Msg. 5) Posted: Wed Oct 03, 2007 5:15 pm
Post subject: Re: Symantec System Center Console on SBS 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Leythos" wrote in message
> In article , czinn.TakeThisOut@makromed.com
> says...
>> I posted this on a Symantec newsgroup, but thought I might get some
>> insight
>> here...
>>
>> We have a new Small Business Server 2003, running the Corporate Edition
>> v.10
>> of Symantec AntiVirus. It is in a managed setup, with the console
>> installed
>> on the server. After restarting the server, access to the SSCC is fine.
>> However, after a while -- perhaps a few hours, up to a day -- the SSCC
>> fails
>> to open (the hourglass flickers for a second, then nothing happens). If
>> you
>> look in the Task Manager, "mmc" is running, but the SSCC never opened. I
>> verified through Services that the follow services are all automatic, and
>> running:
>>
>> Symantec AntiVirus
>> Symantec AntiVirus Definition Watcher
>> Symantec Event Manager
>> Symantec Settings Manager
>> Symantec System Center Discovery Service
>>
>>
>> Anyone have any thoughts/suggestions as to what is going on, and how I
>> can
>> open the SSCC without restarting the server all the time?
>
> If you're running 10.2, uninstall it and install 10.0 or 10.1, not
> 10.1.5. I've had to remove the 10.2 (installs on 2003 as 10.1.5) on
> every server/network because of profile corruptions and lockups.
>
> Symantec just sent me the Symantec EndPoint Protection as a replacement
> for 10.x Corporate Edition (shows as version 11 now) and it's different.
> I'm about to install SEPP on the same servers where 10.2 was locking up.
>
> --
>
> Leythos
> - Igitur qui desiderat pacem, praeparet bellum.
> - Calling an illegal alien an "undocumented worker" is like calling a
> drug dealer an "unlicensed pharmacist"
> spam999free.TakeThisOut@rrohio.com (remove 999 for proper email address)
Interesting. I've got Corporate Edition 10.2 (10.1.5) running on 3 small SBS
client networks with no problems that I can detect. >> Stay informed about: Symantec System Center Console on SBS 2003 |
|
| Back to top |
|
| |
External
Since: Oct 02, 2007
Posts: 3
|
(Msg. 6) Posted: Thu Oct 04, 2007 10:43 am
Post subject: Re: Symantec System Center Console on SBS 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Leythos" wrote in message
>
>> In article , czinn DeleteThis @makromed.com
>> says...
>>> I posted this on a Symantec newsgroup, but thought I might get some
>>> insight
>>> here...
>>>
>>> We have a new Small Business Server 2003, running the Corporate Edition
>>> v.10
>>> of Symantec AntiVirus. It is in a managed setup, with the console
>>> installed
>>> on the server. After restarting the server, access to the SSCC is fine.
>>> However, after a while -- perhaps a few hours, up to a day -- the SSCC
>>> fails
>>> to open (the hourglass flickers for a second, then nothing happens). If
>>> you
>>> look in the Task Manager, "mmc" is running, but the SSCC never opened. I
>>> verified through Services that the follow services are all automatic,
>>> and
>>> running:
>>>
>>> Symantec AntiVirus
>>> Symantec AntiVirus Definition Watcher
>>> Symantec Event Manager
>>> Symantec Settings Manager
>>> Symantec System Center Discovery Service
>>>
>>>
>>> Anyone have any thoughts/suggestions as to what is going on, and how I
>>> can
>>> open the SSCC without restarting the server all the time?
>>
>> If you're running 10.2, uninstall it and install 10.0 or 10.1, not
>> 10.1.5. I've had to remove the 10.2 (installs on 2003 as 10.1.5) on
>> every server/network because of profile corruptions and lockups.
>>
>> Symantec just sent me the Symantec EndPoint Protection as a replacement
>> for 10.x Corporate Edition (shows as version 11 now) and it's different.
>> I'm about to install SEPP on the same servers where 10.2 was locking up.
>>
>> --
>>
>> Leythos
>> - Igitur qui desiderat pacem, praeparet bellum.
>> - Calling an illegal alien an "undocumented worker" is like calling a
>> drug dealer an "unlicensed pharmacist"
>> spam999free DeleteThis @rrohio.com (remove 999 for proper email address)
>
> Interesting. I've got Corporate Edition 10.2 (10.1.5) running on 3 small
> SBS client networks with no problems that I can detect.
Thanks for the replies. We're running 10.0. I tried uninstalling and
reinstalling the SSC, but still saw the same issue afterwards. I have opened
a case with Symantec; we'll see if I get help there.
Thanks.
-Corey >> Stay informed about: Symantec System Center Console on SBS 2003 |
|
| Back to top |
|
| |
External
Since: Jul 07, 2005
Posts: 968
|
(Msg. 7) Posted: Thu Oct 04, 2007 1:33 pm
Post subject: Re: Symantec System Center Console on SBS 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In article , "dan" <dan
(removethis)@westerveltconsulting.com> says...
> Interesting. I've got Corporate Edition 10.2 (10.1.5) running on 3 small SBS
> client networks with no problems that I can detect.
Just installed Symantec Endpoint Protection (11) and found that every
laptop with an Artheos (spelling) card would not maintain a connection.
If we disable AV protection it works fine, enable it again and it dies -
disabled all Network protection of AV and left it enabled and it's still
killing the wireless. Removed SEPP and installed 10.0 or 10.1 and it
works fine again
--
Leythos
- Igitur qui desiderat pacem, praeparet bellum.
- Calling an illegal alien an "undocumented worker" is like calling a
drug dealer an "unlicensed pharmacist"
spam999free.RemoveThis@rrohio.com (remove 999 for proper email address) >> Stay informed about: Symantec System Center Console on SBS 2003 |
|
| Back to top |
|
| |
External
Since: Oct 02, 2007
Posts: 3
|
(Msg. 8) Posted: Tue Oct 09, 2007 3:46 pm
Post subject: Re: Symantec System Center Console on SBS 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
> "Leythos" wrote in message
>>
>>> In article , czinn.RemoveThis@makromed.com
>>> says...
>>>> I posted this on a Symantec newsgroup, but thought I might get some
>>>> insight
>>>> here...
>>>>
>>>> We have a new Small Business Server 2003, running the Corporate Edition
>>>> v.10
>>>> of Symantec AntiVirus. It is in a managed setup, with the console
>>>> installed
>>>> on the server. After restarting the server, access to the SSCC is fine.
>>>> However, after a while -- perhaps a few hours, up to a day -- the SSCC
>>>> fails
>>>> to open (the hourglass flickers for a second, then nothing happens). If
>>>> you
>>>> look in the Task Manager, "mmc" is running, but the SSCC never opened.
>>>> I
>>>> verified through Services that the follow services are all automatic,
>>>> and
>>>> running:
>>>>
>>>> Symantec AntiVirus
>>>> Symantec AntiVirus Definition Watcher
>>>> Symantec Event Manager
>>>> Symantec Settings Manager
>>>> Symantec System Center Discovery Service
>>>>
>>>>
>>>> Anyone have any thoughts/suggestions as to what is going on, and how I
>>>> can
>>>> open the SSCC without restarting the server all the time?
>>>
>>> If you're running 10.2, uninstall it and install 10.0 or 10.1, not
>>> 10.1.5. I've had to remove the 10.2 (installs on 2003 as 10.1.5) on
>>> every server/network because of profile corruptions and lockups.
>>>
>>> Symantec just sent me the Symantec EndPoint Protection as a replacement
>>> for 10.x Corporate Edition (shows as version 11 now) and it's different.
>>> I'm about to install SEPP on the same servers where 10.2 was locking up.
>>>
>>> --
>>>
>>> Leythos
>>> - Igitur qui desiderat pacem, praeparet bellum.
>>> - Calling an illegal alien an "undocumented worker" is like calling a
>>> drug dealer an "unlicensed pharmacist"
>>> spam999free.RemoveThis@rrohio.com (remove 999 for proper email address)
>>
>> Interesting. I've got Corporate Edition 10.2 (10.1.5) running on 3 small
>> SBS client networks with no problems that I can detect.
>
> Thanks for the replies. We're running 10.0. I tried uninstalling and
> reinstalling the SSC, but still saw the same issue afterwards. I have
> opened a case with Symantec; we'll see if I get help there.
>
> Thanks.
>
> -Corey
Symantec had me download and install 10.1.6.6000 (downloaded as 10.2,
installed as 10.1.6.6000), and that seems to have taken care of the issue.
Thanks to all who replied.
-Corey >> Stay informed about: Symantec System Center Console on SBS 2003 |
|
| Back to top |
|
| |
External
Since: Jul 07, 2005
Posts: 968
|
(Msg. 9) Posted: Tue Oct 09, 2007 10:26 pm
Post subject: Re: Symantec System Center Console on SBS 2003 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In article , czinn DeleteThis @makromed.com
says...
> >
> > Thanks for the replies. We're running 10.0. I tried uninstalling and
> > reinstalling the SSC, but still saw the same issue afterwards. I have
> > opened a case with Symantec; we'll see if I get help there.
> >
> > Thanks.
> >
> > -Corey
>
> Symantec had me download and install 10.1.6.6000 (downloaded as 10.2,
> installed as 10.1.6.6000), and that seems to have taken care of the issue.
>
> Thanks to all who replied.
Are you aware that if you have maintenance that you get Symantec
EndPoint Protection now - this is the new version of Symantec Corp Ed
for W/S - I had a LOT of problems on a couple toshiba laptops, but none
of the workstations are showing problems.
--
Leythos
- Igitur qui desiderat pacem, praeparet bellum.
- Calling an illegal alien an "undocumented worker" is like calling a
drug dealer an "unlicensed pharmacist"
spam999free DeleteThis @rrohio.com (remove 999 for proper email address) >> Stay informed about: Symantec System Center Console on SBS 2003 |
|
| Back to top |
|
| |
| Related Topics: | Symantec System Center - Hello everyone, I am trying to install the SSC included with my Symantec AntiVirus 10.0.2 package. The problem I am having is that the installation instructions say: ..
Symantec System Center Ports - I am unable to install licenses to my clients through the License Management console within Symantec System Center. What ports do I have to open in group policy to that I can do this. I already have the following open: 2847:TCP:*:Enabled:SAV-Q - Port...
Anyone running Symantec Mail Security 6.0 on SBS 2003? - We're running Symantec Mail Security for MS Exchange 4.5 on Windows SBS 2003 right now. We received a notice from Symantec that we're able to upgrade to SMS 6.0 for Exchange for free, per the terms of our license contract. On the sys requirements locate...
Symantec 10.1 / Exchange 2003 System Manager fails to star.. - I have recently install Microsoft SBS 2003. Everything was working as expected until I installed Symantec Corporate Edition 10.1; shortly later I was unable to startup Exchange System Manager. I was able to install Exchange System Manager on a different....
SBS 2003 - Norton Security Compatability - We have SBS 2003 installed on our server with AVAST! for a security system. We are not happy with this and want to change to Norton Security but need to be sure that it is completely compatible with the server software, we have heard conflicting.. |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Search
Profile
Private Messages
Log in
